Home /
F1050STD

F1050STD

(Ratios = 1:1,1.686:1,3.092:1,6.398:1)

(Input Shaft Diameter = 2.00” - Output Shaft Diameter = 2.00”)

The F1050STD is less than 11” tall, is assembled with a close grain cast iron housing, and is capable of transmitting up to 50 horsepower at 1800 rpm. The F1050STD offers 4 different speeds and the handle can be attached to either side. The shafts of the F1050STD rotate in the same direction and the unit can be utilized as an increaser or reducer. If you would like additional information about the F1050STD please contact a Drive-All Sales Engineer at 800-689-3400 or visit the Drive-All web-site at:www.driveallmfg.com

Previous applications include: Large Wire Winding and Roll Forming

Weight: 250.00 LBS

$7,945.67

Request For Quote

More Views

Horsepower and Torque Rating
Input Speed	Max. Input Hp*	Max. Input Torque
100	2.78	2222
200	5.56	2194
300	8.33	2167
400	11.11	2139
500	13.89	2111
600	16.67	2083
700	19.45	2056
800	22.22	2028
900	25.00	2000
1000	27.78	1972
1100	30.56	1944
1200	33.34	1917
1300	36.11	1889
1400	38.89	1861
1500	41.67	1833
1600	44.45	1806
1700	47.23	1778
1800	50.00	1750

*All gearboxes are rated at 1800 rpm
** Excessive overhung load can dramatically affect gearbox capabilities and performance

F1050STD

More Views

INFORMATION

Contact Us